If you’re planning on doing any brickwork, it’s essential to have the right tools for the job. An Easefix has a wide range of bricklaying tools to suit every need, from trowels and hawk boards to electric mixers and level lasers. In this blog post, we’ll look at five essential bricklaying tools that every Easefix customer should consider.
1. The Trowel
A trowel is perhaps an essential tool for any bricklayer. It’s used for scooping mortar, spreading it on bricks, and shaping it into the desired shape. The trowel can also be used to level off the top of a wall or to make sure that the bricks are evenly spaced. It is also used to create the joints between bricks. The joint is the space between two bricks that allow for expansion and contraction. Without the joint, the bricks would eventually crack. The trowel is also used to pack mortar into the joints to make sure that they are sealed. There are many different types and sizes of trowels available, so it’s essential to choose one that’s comfortable for you to use.
2. The Level and plumb liner
A level is crucial for ensuring that your bricks are laid evenly and accurately. The level is another vital tool for a bricklayer. It is used to make sure that the bricks are level with each other and that the wall is horizontal. The level can also be used to check the vertical alignment of the bricks. If the wall is not level, it can cause the bricks to crack or to shift out of place.
The plumb line is another tool that is used to check the vertical alignment of the bricks. It is a string with a weight at the end that is dropped down from the top of the wall. The importance should hit the center of each brick as it goes down. If it does not, then the wall is not vertical.
3. The Hammer
The hammer is one of the essential tools in bricklaying. It is used to strike the bricks and break them into smaller pieces. It is also used to form a groove in the mortar so that it can be easily removed. The hammer can also be used to level the surface of the bricks. This is done by striking the top of the bricks with the head of the hammer. This will make the bricks level with each other. The hammer handle can also be used to clean up the excess mortar from the surface of the bricks. This is done by wiping the handle across the surface of the bricks.
4. The Saw
There are many uses for a saw in bricklaying. For example, a saw can be used to cut bricks to the desired size and shape and create slots or holes in bricks for wiring or plumbing. In addition, a saw can also be used to score lines on bricks before breaking them. There are many different types of saws available, so it’s essential to choose one that’s comfortable for you to use.
5. The Wheelbarrow
A wheelbarrow is a common tool used in bricklaying. It transports bricks, mortar, and other materials from one location to another. The wheelbarrow has a tray or bucket attached to it, which is used to hold the materials. The wheelbarrow is pushed and pulled by the person using it, and the wheels help to move the load across uneven ground.
A wheelbarrow is an essential tool for any bricklayer, as it helps them to move materials around the site quickly and easily. Without a wheelbarrow, bricklayers would have to carry all the materials by hand, which would be very time-consuming and physically demanding. Choosing a wheelbarrow that’s the right size for you and your project is essential.These are just a few of the essential tools that any bricklayer needs. With these tools, you’ll be well on completing your project.
