If you’re thinking of hanging curtains in your home, it is essential to know how to hang curtain rods correctly. Not only will this give your space a fresh new look, but it will save you money in the long run as well.
First and foremost, measure the window to determine how long to hang your rod. This will help ensure a secure fit and provide ample clearance for hanging accessories.
Table of Contents
1. Measure The Window
To hang curtains correctly, you must measure the window and determine the length of your rod. This step is essential as it ensures you receive just enough light into your home.
To accurately measure your window, use a metal measuring tape or yardstick to mark its width at three points. Then round your measurement up to the nearest 1/8 inch.
2. Measure The Rod
When hanging curtain rods, it is essential to measure them accurately. An incorrect measurement can give your window treatment a cheap and disorganized appearance.
Tape measure or tapestry brush the height of the wall where you want your rod installed. Make sure that both sides of your window can be seen from this spot, as well as the floor below it.
3. Measure The Brackets
The brackets holding the rod are an essential element of your decorative drapery installation, so be sure to select them carefully to coordinate with other hardware pieces.
When selecting brackets for your window treatment, the length and style should be taken into consideration. Furthermore, ensure they are level from side to side and at a proper height above the floor.
For optimal results, measure and mark where you wish to hang brackets with a pencil on the wall. Be sure to indicate the appropriate width and length for each spot.
How to hang curtain rods correctly
4. Mark The Wall
Installing curtain rods on drywall requires drilling fasteners into the studs behind the wall. If you can’t locate a stud, use plastic anchors that screw directly into the drywall for added support.
To make the process simpler, measure and mark a line on the wall. You may also need to mark a center support bracket for long curtains.
5. Drill The Holes
Hang curtains without drilling holes with adhesive strips, Velcro, and tension rods – all easy to install, need minimal measurements, and won’t damage your walls.
Begin by measuring out from the window one or two inches (depending on personal preference) and marking lightly in pencil. Afterward, use a carpenter’s level to determine where you should mount your first curtain rod bracket.
6. Attach The Brackets
When hanging curtains, it is essential to attach the brackets securely. They must be strong enough to support the weight of the curtains and also complement the room’s style and decor.
Brackets are typically constructed of metal or other durable material. However, they can also be designed with a more decorative element for added visual interest.
7. Hang The Curtains
Hanging curtains can add a cozy atmosphere to any room while providing privacy and insulation.
Before hanging curtains, you need to decide where the curtain rod brackets should go on the wall. Aim for about 3 to 6 inches on either side of the window for optimal placement.
It’s especially essential if your ceiling height allows you to hang the rod above the window frame. Use a pencil to mark bracket placements, and then use a level to ensure they’re evenly spaced on the wall.
