Plaster is a blend of dry material like gypsum and water to create a consistent paste to apply on the surface.
Today, plastering the ceiling surface comes in various textures and varieties like the popcorn ceilings, sheetrock texture, orange peel and many more like in the below-mentioned list.
Texture and plaster solution ideas for residential ceilings:
Orange Peel
Orange strip surface is an extremely light, splashed on plaster that covers drywall imperfections in the roof.
The surface is made from a joint compound blended with water, and the resultant effect imitates the real orange fruit’s external surface.
Orange peel surface makes a limited quantity of plastering relief and may not hide all drywall defects.
Popcorn Ceilings
Popcorn roofs are a type of spray-on plaster blended in with plastic, foam or other materials. This texture acts like an acoustical splash on material that makes extra soundproofing in a room.
When applied, it forms peaks and mounds on the roof. These are left to set up and not smoothed down. The plaster can be left unfinished, or a layer of paint might be applied. Some find that in the future, the mounds and peaks can be difficult to decorate, which is where companies that offer Joliet Texture Matching, or companies wherever you are based, can help to smooth out the bumpy texture and match it.
Skip Trowel
Skip trowel surfaces made by a drywall trowel that moves and hops over the surface. Small quantities of the plaster mixture are stamped onto the surface with a trowel.
Again, stamping on that wet plaster makes peaks in the mixture. These peaks are then crushed to frame huge shapes like island for creating the desired texture.
The material likewise gives sound-dampening and cover imperfection of drywall installation.
Sheetrock Ceiling Texture
This drywall roof surface is rough that can give an aesthetic look to your roof. Rather than utilizing spray paint, this surface can be created by using a hand strategy with no use of brushes.
It can go with any type of room, whether it is a modern style with designer wallpapers or farmhouse style room loaded up with wooden furniture.
Crow’s Foot Ceiling Texture
You will require a stipple brush to make the crow’s foot roof surface. This surface is generally a two-person work since it needs somebody to apply the stipple brush design.
In contrast, the other one applies mud in different areas. This can be a messy task, so ensure that you spread plastic sheets to cover your room.
Stipple Brush Ceiling Texture
This roof surface requires more expertise because it is quite challenging. You can make this surface by utilizing a roller and slap brush.
It’s not a smooth kind of surface; hence, you can use it to cover defects on your roofs, for example, gaps or so on. This surface is kind of pretty thick and in case you’re not talented enough, it may get messy.
Whirl Ceiling Texture
To make this roof surface, you can utilize either a roller or sprayer. You can also do with a technique of basic whirl strategy by using a trowel.
This roof surface requires a great deal of persistence, and the whirls will rely upon the instrument you will use.
The tricky part of applying this surface is that you have to make the pattern before the mud dries out. If you have a wide roof surface, you should need someone for help to do this job.
Hawk and Trowel Ceiling Texture
As the name suggests, you will require a hawk and trowel to make this roof texture. It is additionally a drywall ceiling that is not smooth.
It can give your roof a dramatic effect. This texture is easy to make, and it likewise doesn’t require a high amount of expertise, in comparison to the above said some roof surfaces.
Smooth Ceiling Texture
This surface is less expensive, and it doesn’t require high skill, so the majority of people considered it as a top choice. Besides that, it can also give a steady look to your room, comparatively to other ceiling textures.
A smooth roof surface is extremely easy to remove at any time if you are thinking about renovations, and it is simple to apply too.
This roof surface is additionally compatible for any room with different styles. If you like a basic and moderate roof finish, then this texture is an excellent option for you. 
Stomp Ceiling Texture
Stomp roof texture is applied by utilizing a roller and a stomp brush. To get the correct texture, you will require a joint drywall compound that will be thinned to a paintable consistency with water.
Ensure to cover your space with plastic sheets before applying the mixture because making this surface is a little messy task.
Tree Bark Ceiling Texture
This texture gives the tree bark look to your ceilings. It can be created by a substantial roller. This is a simple but creative texture that can draw more praise to your roof.
If your home has a farmhouse style, this can be an ideal texture for your home.
What is the ideal material used in plastering?
Lime or gypsum is the most used material to plaster ceilings and drywalls. Lime was utilized until the start of the twentieth century when gypsum was introduced.
The two materials were hand-applied to roofs. Meanwhile, the gypsum was formed into drywall sheets in the 1950s. The plaster was blended with sand, animal hair and sometimes hay for grit and durability.
In modern days, these two materials have widely used for constructing buildings and homes.
However, with the time, some new materials like cement have developed and also used more frequently for construction.
Besides all, whatever material you are using, you can create some unique textures to give your ceilings artistic look.
